Return to Spectrum Techniques page
Specifications
Power for the GPI is provided from the high voltage supply used
to operate the GM tube. Current requirement is about 500 µA. so a high voltage
supply with a capacity of at least 1 mA. is recommended. Geiger tubes normally
operate in the range of +300 to +1000 volts depending on the specific tube, so
the operating plateau should first be run to determine the correct operating
voltage.
Connectors on the standard model GPI are as follows:
OUTPUT = BNC, HIGH VOLTAGE = SHV, GM TUBE = MHV.
NOTE: For our GM25 and GM35 detectors, you will either need a
BNC cable connector to the GM Tube and an MHV cable connector to the GPI, or,
ask us to change the GM Tube input connector to a BNC.
For other connectors, specify at time of order.
ORDER: GPI GM Pulse Inverter