XRF CORPORATION
ICS-4000 Radionuclide Identifier
The ICS-4000 Radionuclide Identifier is a hand
held gamma-ray spectrometer that combines a multichannel analyzer
with a high resolution Cadmium Telluride (CdTe) detector. The
ICS-4000 is programmed to automatically analyze gamma ray spectra
and report detected radionuclides and dose rates. Users can select
from preprogrammed isotope libraries or can define custom libraries
from a list of over 160 radionuclides.
ICS-4000e Radionuclide Identifier
The ICS-4000e Radionuclide Identifier is a hand held gamma-ray spectrometer that combines a multichannel analyzer with an external high resolution Cadmium Telluride (CdTe) detector. Purchase of ICS-4000e includes standard accessories (see Features and Specs). Probe and cable are required, but must be purchased separately. User may attach the XP Submersible Gamma Ray Probe and/or XM External Detector.
XP Submersible Gamma Ray Probe
Designed
to be used with the ICS-4000e Radionuclide Identifier, the XP probe
contains a 10x10x1 CdTe detector and a charge sensitive preamplifier
mounted in a 1" diameter x 6" long housing. The XP probe can be used
with up to 500' of cable providing a high resolution spectrometer
for a variety of measurements that would otherwise be impossible.
The ICS-4000e Radioisotope Identifier provides a 4000-channel
multichannel analyzer and LCD to accurately display lab quality
spectra of gamma ray photons with energies from 10keV to 2MeV.
Built-in software provides isotope identification and dose rate
information. Two megabytes of flash memory provide non-volatile
storage for hundreds of spectra. Spectra and other data can be
downloaded to a PC via RS-232. Powered by a rechargeable Lithium-ion
battery pack, the unit will provide up to 24 hours of continuous
measurement on a single charge. The battery pack is removable, and
can be replaced with an auxiliary power pack for extended operation.
XP Submersible Gamma Probe Spec Sheet
XM External Detector
10x10x1 mm CZT Detector
EVA-1 Radiation Alarm
As a first responder, you must prepare for
dangerous radiation from dirty bombs or industrial accidents. You
and your team need real-time radiation monitoring to reduce the risk
of exposure and manage the emergency.
The EVA-1 Radiation Alarm introduces a new concept in radiation
detection. The EVA-1 is the only radiation alarm designed for
permanent installation on emergency vehicles. The external sensor
detects elevated radiation levels and the internal indicator alerts
responders. Incident commanders now have the immediate situational
awareness needed to direct emergency response protocol.
The external sensor and the internal indicator are hard wired into
the emergency response vehicle and remain operational whenever the
vehicle is running.
EVA-1 Radiation Alarm Spec Sheet
Items for Purchase as Options or Replacement
Parts -- ICS-4000 and ICS-4000e
Hard Case
Rugged poly case with secure, lockable closure, padded interior.
Field Case
Soft-sided
case with convenient shoulder strap, belt loop, accessory pocket
velcro closures.
Rechargeable
Battery Pack
AA Battery Pack
AC Power Module
Wall Transformer
Charges battery pack from 115 VAC outlet.
RS-232 Cable
Connects ICS-4000 to PC for transfer of data.
CS-4000
detachable handle
Removable rugged delrin plastic handle.
Car Adapter
Charges
battery pack from 12 VDC outlet.
User Manual
One user manual is
supplied with each ICS-4000 and ICS-4000e.
Additional manuals available for purchase.
Items for Purchase as Options or Replacement Parts -- ICS-4000e Only
XP Submersible Gamma Ray Probe
See detailed description above.
XM External
Detector
10x10x1 mm CZT Detector
Cables for External Probes
Cables for XP Submersible Gamma Ray Probe and XM External Detector.
Specify length when ordering: 12' 20' 50' 100'
CP-1 Collimator
2 cm tungsten in aluminum case. 99.6% shielding efficiency at 662
keV.
Telescoping
pole
Telescoping pole for use with external probe.
Available in
6’,12’, and 20’.